SBALedger

SBA loans for resin, synthetic rubber, and artificial and synthetic fibers and filaments manufacturing

NAICS code
3252
Level
Industry group
Approvals, FY2022 to FY2026
60
Median 7(a) approval
$500K

SBA approved 60 loans for resin, synthetic rubber, and artificial and synthetic fibers and filaments manufacturing (NAICS 3252) in FY2022 to FY2026, worth $59.7M. 41 are under the 7(a) program and 19 are under the 504 program. That is less than 0.1% of all approvals in the country.

In FY2026 the industry had 5 approvals, worth $6.6M. In FY2025 the industry had 9.

By approvals in FY2022 to FY2026, it was number 240 of 279 NAICS industry groups with 30 or more approvals. The position counts approvals. It is not a grade.

Approvals for the industry fell by 38.8%: 98 in FY2017 to FY2021 and 60 in FY2022 to FY2026. Approvals in the United States rose by 13.1%: 303,831 and 343,498. 31.7% of the approvals for the industry were in the size band $1 million to $2 million. The share for all industries was 8.4%.

Total Jobs Created + Jobs Retained as reported by lender on SBA Loan Application. SBA does not review, audit, or validate these numbers - they are simply self-reported, good faith estimates by the lender.

EXEMPT = The status of loans that have been disbursed but have not been cancelled, paid in full, or charged off are exempt from disclosure under FOIA Exemption 4

SBA's words. Source: U.S. Small Business Administration, 7(a) and 504 FOIA Data Dictionary, copied on .

In plain words: Jobs are estimates that SBA does not check. SBA does not disclose the status of a loan that is disbursed and not paid in full or charged off. The SBA file gives approvals to . Loan status for approvals before FY2020 is from the file of .

Lenders with the most approvals

FY2022 to FY2026

32 lenders had an approval in this industry. The number of approvals shows how active a lender is in the industry.

Resin, Synthetic Rubber, and Artificial and Synthetic Fibers and Filaments Manufacturing: lenders by number of approvals
LenderApprovalsDollarsShare
Premier Capital CorporationCDC in Indianapolis, IN9$12.1M15.0%
The Huntington National BankColumbus, OH5$575K8.3%
Northwest BankBoise, ID4$2.8M6.7%
TD Bank, National AssociationWilmington, DE4$540K6.7%
Business Development Corporation (BDC)CDC in South Bend, IN3$4.2M5.0%
Byline BankChicago, IL2-3.3%
Gulfside BankP.O. Box 1824, FL2-3.3%
Small Business Growth CorporationCDC in Springfield, IL2-3.3%
Beacon Bank and TrustBrookline, MA2-3.3%
B:Side CapitalCDC in Denver, CO2-3.3%
JPMorgan Chase Bank, National AssociationColumbus, OH2-3.3%
Northeast BankLewiston, ME2-3.3%
Readycap Lending, LLCBerkeley Heights, NJ2-3.3%
First Financial Bank, National AssociationTerre Haute, IN1-1.7%
Greater East Texas Certified Development CompanyCDC in Tyler, TX1-1.7%
Fifth Third BankCincinnati, OH1-1.7%
PNC Bank, National AssociationWilmington, DE1-1.7%
Isabella BankMount Pleasant, MI1-1.7%
FDIC - Community Bank & Trust-West GeorgiaLagrange, GA1-1.7%
Growth Capital Corp.CDC in Cleveland, OH1-1.7%

Approvals by fiscal year

FY2017 to FY2026

Approvals and gross approval amount by federal fiscal year. FY2026 is 1 October 2025 to 30 September 2026.

Resin, Synthetic Rubber, and Artificial and Synthetic Fibers and Filaments Manufacturing: SBA 7(a) and 504 approvals by fiscal year
Fiscal year7(a) approvals7(a) dollarsMedian 7(a) approval504 approvals504 dollarsAll approvalsJobs supported, as reported
FY20264$6.0M$1.4M1-556
FY20256$4.7M$675K3$4.0M991
FY202415$11.3M$500K1-16177
FY20236$6.3M$425K5$5.6M11433
FY202210$6.8M$125K9$14.0M19208
FY202117$17.4M$751K4$9.1M21212
FY202014$14.6M$410K2-16307
FY201917$8.1M$225K2-19141
FY201817$15.2M$215K4$2.8M21350
FY201719$8.0M$300K2-21173

SBA records the NAICS code in force when it approved a loan. The 2022 NAICS revision gave new codes to parts of retail trade and information. In FY2017 to FY2021 this code had 98 approvals.

States and franchise brands

FY2022 to FY2026
Resin, Synthetic Rubber, and Artificial and Synthetic Fibers and Filaments Manufacturing: approvals by state
State of the businessApprovalsDollarsShare
Indiana12$15.2M20.0%
Ohio7$2.5M11.7%
Pennsylvania4$6.8M6.7%
Florida4$4.2M6.7%
Texas4$3.9M6.7%
Idaho4$2.8M6.7%
Michigan3$4.9M5.0%
Illinois3$2.6M5.0%
North Carolina2-3.3%
California2-3.3%
New York2-3.3%
Utah2-3.3%
Colorado2-3.3%
New Hampshire2-3.3%
Tennessee1-1.7%

Loan sizes and interest rates

FY2022 to FY2026

The median 7(a) approval was $500K. The median for all industries was $170K. The industry had 38.3 approvals for each 1,000 establishments, from 1,567 establishments. The figure for all industries was 41.1.

Approvals by size

  • $50,000 or less8.3%5
  • $50,001 to $150,00013.3%8
  • $150,001 to $350,00013.3%8
  • $350,001 to $1 million21.7%13
  • $1 million to $2 million31.7%19
  • Over $2 million11.7%7

Approvals by age of the business

  • Existing, more than 2 years old83.3%50
  • New business, 2 years or less3.3%2
  • Startup, loan funds will open the business3.3%2
  • Change of ownership10.0%6
Resin, Synthetic Rubber, and Artificial and Synthetic Fibers and Filaments Manufacturing: median initial interest rate of 7(a) approvals by fiscal year
Fiscal yearThis industry, median initial rateLoans with a rateAll industries, median for the same year
FY2026-49.50%
FY2025-610.25%
FY2024-1511.25%
FY2023-610.25%
FY2022-106.00%

The initial interest rate is the rate that the SBA file gives for a 7(a) loan at approval. A rate of a variable loan can change later. The site shows a median only when 20 or more loans have a rate. A hyphen means that the site does not show the figure.

Resin, Synthetic Rubber, and Artificial and Synthetic Fibers and Filaments Manufacturing beside all industries
FY2022 to FY2026NAICS 3252All industries
Median 7(a) approval$500K$170K
Median 504 approval$1.2M$708K
Average approval$996K$557K
Approvals for each 1,000 establishments38.341.1
Approvals to franchise businesses0.0%11.0%
Jobs supported for each approval, as reported16.110.2

How earlier loans turned out

Loans approved FY2010 to FY2021

The site counts only loans approved five fiscal years ago or more. A newer loan has had little time to be paid in full or charged off.

Resin, Synthetic Rubber, and Artificial and Synthetic Fibers and Filaments Manufacturing: loan status as SBA records it, beside all industries
Loans approved FY2010 to FY2021This industry, 7(a)All 7(a)This industry, 504All 504
Approvals in these years215639,9054685,591
Cancelled or not disbursed2679,304712,510
Disbursed loans189560,6013973,081
Paid in full148438,1232236,219
Charged off637,1903910
Not paid in full and not charged off (SBA does not disclose the status)3585,2881435,952
Charged off, share of disbursed loans3.2%6.6%7.7%1.2%
Dollars charged off, share of disbursed dollars1.6%2.5%6.2%0.9%
Dollars charged off$2.1M$5.77bn$2.5M$498M
Resin, Synthetic Rubber, and Artificial and Synthetic Fibers and Filaments Manufacturing, 7(a)3.2%
All industries, 7(a)6.6%
Resin, Synthetic Rubber, and Artificial and Synthetic Fibers and Filaments Manufacturing, 5047.7%
All industries, 5041.2%
Share of disbursed loans approved FY2010 to FY2021 that SBA records as charged off.

What "charged off" means

Other parts of Chemical Manufacturing

FY2022 to FY2026

Official channels

These links open pages of the agencies. The site checked each address on .

Cite this page

SBA Ledger. SBA loans for resin, synthetic rubber, and artificial and synthetic fibers and filaments manufacturing (NAICS 3252). https://sbaledger.com/industry/3252/

Source: U.S. Small Business Administration, 7(a) and 504 FOIA loan data. The SBA file gives approvals to . The address of this page does not change.

About these figures

The figures are totals of the SBA 7(a) and 504 FOIA loan files. The data date is . Loan status for approvals before FY2020 is from . SBA updates the files each quarter.

A count is a count of approvals, with the approvals that SBA cancelled later. The five-year window is FY2022 to FY2026. The charge-off share uses loans approved FY2010 to FY2021. SBA lists each loan under the lender that holds it today. The establishment counts are from County Business Patterns 2023 of the Census Bureau. The site shows a dollar figure only for three or more approvals. It names no borrower.

How the totals are made. Report an error. Glossary.

Questions

Which lenders had the most approvals for resin, synthetic rubber, and artificial and synthetic fibers and filaments manufacturing?
These lenders had the most approvals in FY2022 to FY2026:
Which states had the most approvals for resin, synthetic rubber, and artificial and synthetic fibers and filaments manufacturing?
These states had the most approvals in FY2022 to FY2026:
How large are the approvals for resin, synthetic rubber, and artificial and synthetic fibers and filaments manufacturing?
The median 504 approval was $1.2M. The average approval across both programs was $996K. The average for all industries was $557K. Jobs supported, as reported on the loan application, were 16.1 for each approval.
What interest rate did 7(a) loans carry in this industry?
The site shows no median initial rate in this industry for FY2026. The rate needs 20 or more 7(a) approvals with a rate.