SBALedger

SBA loans for rubber product manufacturing

NAICS code
3262
Level
Industry group
Approvals, FY2022 to FY2026
81
Median 7(a) approval
$350K

SBA approved 81 loans for rubber product manufacturing (NAICS 3262) in FY2022 to FY2026, worth $76.9M. 70 are under the 7(a) program and 11 are under the 504 program. That is less than 0.1% of all approvals in the country.

In FY2026 the industry had 16 approvals, worth $20.1M. In FY2025 the industry had 13.

By approvals in FY2022 to FY2026, it was number 224 of 279 NAICS industry groups with 30 or more approvals. The position counts approvals. It is not a grade.

Approvals for the industry fell by 26.4%: 110 in FY2017 to FY2021 and 81 in FY2022 to FY2026. Approvals in the United States rose by 13.1%: 303,831 and 343,498. 4.9% of the approvals for the industry were in the size band $50,000 or less. The share for all industries was 22.9%.

Total Jobs Created + Jobs Retained as reported by lender on SBA Loan Application. SBA does not review, audit, or validate these numbers - they are simply self-reported, good faith estimates by the lender.

EXEMPT = The status of loans that have been disbursed but have not been cancelled, paid in full, or charged off are exempt from disclosure under FOIA Exemption 4

SBA's words. Source: U.S. Small Business Administration, 7(a) and 504 FOIA Data Dictionary, copied on .

In plain words: Jobs are estimates that SBA does not check. SBA does not disclose the status of a loan that is disbursed and not paid in full or charged off. The SBA file gives approvals to . Loan status for approvals before FY2020 is from the file of .

Lenders with the most approvals

FY2022 to FY2026

49 lenders had an approval in this industry. The number of approvals shows how active a lender is in the industry.

Rubber Product Manufacturing: lenders by number of approvals
LenderApprovalsDollarsShare
Newtek Bank, National AssociationMiami, FL7$6.6M8.6%
U.S. Bank, National AssociationCincinnati, OH4$4.8M4.9%
Midwest Business Finance CorporationCDC in St. Cloud, MN3$3.0M3.7%
The Huntington National BankColumbus, OH3$2.4M3.7%
Zions Bancorporation, National AssociationSalt Lake City, UT3$2.3M3.7%
TD Bank, National AssociationWilmington, DE3$2.1M3.7%
Live Oak Banking CompanyWilmington, NC3$1.3M3.7%
KeyBank National AssociationCleveland, OH3$720K3.7%
First Resource BankLino Lakes, MN2-2.5%
Colony BankFitzgerald, GA2-2.5%
Northwest BankWarren, PA2-2.5%
CDC Small Business Finance Corp.CDC in San Diego, CA2-2.5%
Wells Fargo Bank National AssociationSioux Falls, SD2-2.5%
Manufacturers and Traders Trust CompanyBuffalo, NY2-2.5%
Tompkins Community BankIthaca, NY2-2.5%
Texas Capital BankDallas, TX2-2.5%
Rockland Trust CompanyRockland, MA2-2.5%
Falcon National BankFoley, MN2-2.5%
First Bank of the LakeOsage Beach, MO2-2.5%
Millennium BankOoltewah, TN1-1.2%

Approvals by fiscal year

FY2017 to FY2026

Approvals and gross approval amount by federal fiscal year. FY2026 is 1 October 2025 to 30 September 2026.

Rubber Product Manufacturing: SBA 7(a) and 504 approvals by fiscal year
Fiscal year7(a) approvals7(a) dollarsMedian 7(a) approval504 approvals504 dollarsAll approvalsJobs supported, as reported
FY202614$14.5M$323K2-16280
FY202512$12.3M$344K1-13134
FY202421$17.1M$250K3$4.3M24419
FY202310$8.6M$425K1-11126
FY202213$6.3M$350K4$5.3M17374
FY202121$11.4M$374K8$10.4M29355
FY202017$8.8M$183K4$3.2M21228
FY201912$9.3M$395K2-14291
FY201822$12.3M$325K8$13.4M30269
FY201714$9.2M$222K2-16152

SBA records the NAICS code in force when it approved a loan. The 2022 NAICS revision gave new codes to parts of retail trade and information. In FY2017 to FY2021 this code had 110 approvals.

States and franchise brands

FY2022 to FY2026
Rubber Product Manufacturing: approvals by state
State of the businessApprovalsDollarsShare
Ohio11$11.2M13.6%
California9$9.9M11.1%
Texas9$7.2M11.1%
New York7$5.6M8.6%
Florida5$7.2M6.2%
Minnesota5$3.5M6.2%
Oregon5$1.4M6.2%
Georgia3$5.4M3.7%
Connecticut3$800K3.7%
Maryland3$350K3.7%
Wisconsin2-2.5%
Iowa2-2.5%
Massachusetts2-2.5%
New Jersey2-2.5%
Pennsylvania2-2.5%
Rubber Product Manufacturing: approvals by franchise brand
Franchise brandApprovalsShare
Pirtek33.7%

3.7% of the approvals have a franchise code.

Loan sizes and interest rates

FY2022 to FY2026

The median 7(a) approval was $350K. The median for all industries was $170K. The industry had 46.1 approvals for each 1,000 establishments, from 1,756 establishments. The figure for all industries was 41.1. 3.7% of its approvals went to franchise businesses.

Approvals by size

  • $50,000 or less4.9%4
  • $50,001 to $150,00017.3%14
  • $150,001 to $350,00028.4%23
  • $350,001 to $1 million19.8%16
  • $1 million to $2 million13.6%11
  • Over $2 million16.0%13

Approvals by age of the business

  • Existing, more than 2 years old64.2%52
  • New business, 2 years or less7.4%6
  • Startup, loan funds will open the business11.1%9
  • Change of ownership17.3%14
Rubber Product Manufacturing: median initial interest rate of 7(a) approvals by fiscal year
Fiscal yearThis industry, median initial rateLoans with a rateAll industries, median for the same year
FY2026-149.50%
FY2025-1210.25%
FY202411.00%2111.25%
FY2023-1010.25%
FY2022-136.00%

The initial interest rate is the rate that the SBA file gives for a 7(a) loan at approval. A rate of a variable loan can change later. The site shows a median only when 20 or more loans have a rate. A hyphen means that the site does not show the figure.

Rubber Product Manufacturing beside all industries
FY2022 to FY2026NAICS 3262All industries
Median 7(a) approval$350K$170K
Median 504 approval$1.5M$708K
Average approval$950K$557K
Approvals for each 1,000 establishments46.141.1
Approvals to franchise businesses3.7%11.0%
Jobs supported for each approval, as reported16.510.2

How earlier loans turned out

Loans approved FY2010 to FY2021

The site counts only loans approved five fiscal years ago or more. A newer loan has had little time to be paid in full or charged off.

Rubber Product Manufacturing: loan status as SBA records it, beside all industries
Loans approved FY2010 to FY2021This industry, 7(a)All 7(a)This industry, 504All 504
Approvals in these years215639,9056385,591
Cancelled or not disbursed3579,304412,510
Disbursed loans180560,6015973,081
Paid in full152438,1233036,219
Charged off837,1902910
Not paid in full and not charged off (SBA does not disclose the status)2085,2882735,952
Charged off, share of disbursed loans4.4%6.6%3.4%1.2%
Dollars charged off, share of disbursed dollars1.9%2.5%0.7%0.9%
Dollars charged off$2.4M$5.77bn$451K$498M
Rubber Product Manufacturing, 7(a)4.4%
All industries, 7(a)6.6%
Rubber Product Manufacturing, 5043.4%
All industries, 5041.2%
Share of disbursed loans approved FY2010 to FY2021 that SBA records as charged off.

What "charged off" means

Other parts of Plastics and Rubber Products Manufacturing

FY2022 to FY2026

Official channels

These links open pages of the agencies. The site checked each address on .

Cite this page

SBA Ledger. SBA loans for rubber product manufacturing (NAICS 3262). https://sbaledger.com/industry/3262/

Source: U.S. Small Business Administration, 7(a) and 504 FOIA loan data. The SBA file gives approvals to . The address of this page does not change.

About these figures

The figures are totals of the SBA 7(a) and 504 FOIA loan files. The data date is . Loan status for approvals before FY2020 is from . SBA updates the files each quarter.

A count is a count of approvals, with the approvals that SBA cancelled later. The five-year window is FY2022 to FY2026. The charge-off share uses loans approved FY2010 to FY2021. SBA lists each loan under the lender that holds it today. The establishment counts are from County Business Patterns 2023 of the Census Bureau. The site shows a dollar figure only for three or more approvals. It names no borrower.

How the totals are made. Report an error. Glossary.

Questions

Which lenders had the most approvals for rubber product manufacturing?
These lenders had the most approvals in FY2022 to FY2026:
Which states had the most approvals for rubber product manufacturing?
These states had the most approvals in FY2022 to FY2026:
How large are the approvals for rubber product manufacturing?
The median 504 approval was $1.5M. The average approval across both programs was $950K. The average for all industries was $557K. Jobs supported, as reported on the loan application, were 16.5 for each approval.
What interest rate did 7(a) loans carry in this industry?
The site shows no median initial rate in this industry for FY2026. The rate needs 20 or more 7(a) approvals with a rate.