SBALedger

SBA loans for spring and wire product manufacturing

NAICS code
3326
Level
Industry group
Approvals, FY2022 to FY2026
48
Median 7(a) approval
$525K

SBA approved 48 loans for spring and wire product manufacturing (NAICS 3326) in FY2022 to FY2026, worth $75.4M. 28 are under the 7(a) program and 20 are under the 504 program. That is less than 0.1% of all approvals in the country.

In FY2026 the industry had 8 approvals, worth $11.5M. In FY2025 the industry had 9.

By approvals in FY2022 to FY2026, it was number 253 of 279 NAICS industry groups with 30 or more approvals. The position counts approvals. It is not a grade.

Approvals for the industry fell by 15.8%: 57 in FY2017 to FY2021 and 48 in FY2022 to FY2026. Approvals in the United States rose by 13.1%: 303,831 and 343,498. 0.0% of the approvals for the industry were in the size band $50,000 or less. The share for all industries was 22.9%.

Total Jobs Created + Jobs Retained as reported by lender on SBA Loan Application. SBA does not review, audit, or validate these numbers - they are simply self-reported, good faith estimates by the lender.

EXEMPT = The status of loans that have been disbursed but have not been cancelled, paid in full, or charged off are exempt from disclosure under FOIA Exemption 4

SBA's words. Source: U.S. Small Business Administration, 7(a) and 504 FOIA Data Dictionary, copied on .

In plain words: Jobs are estimates that SBA does not check. SBA does not disclose the status of a loan that is disbursed and not paid in full or charged off. The SBA file gives approvals to . Loan status for approvals before FY2020 is from the file of .

Lenders with the most approvals

FY2022 to FY2026

27 lenders had an approval in this industry. The number of approvals shows how active a lender is in the industry.

Spring and Wire Product Manufacturing: lenders by number of approvals
LenderApprovalsDollarsShare
Meridian BankMalvern, PA6$5.3M12.5%
The Mortgage Capital Development CorporationCDC in Oakland, CA5$14.5M10.4%
Fifth Third BankCincinnati, OH4$3.0M8.3%
U.S. Bank, National AssociationCincinnati, OH4$2.5M8.3%
Central Minnesota Development CompanyCDC in Andover, MN2-4.2%
Citibank, N.A.Sioux Falls, SD2-4.2%
Empire State Certified Development CorporationCDC in Latham, NY2-4.2%
The Huntington National BankColumbus, OH2-4.2%
Premier Capital CorporationCDC in Indianapolis, IN2-4.2%
Bank of America, National AssociationCharlotte, NC2-4.2%
California Statewide Certified Development CorporationCDC in Davis, CA1-2.1%
Live Oak Banking CompanyWilmington, NC1-2.1%
Capital Matrix, Inc.CDC in Boise, ID1-2.1%
Old National BankEvansville, IN1-2.1%
Pivotal Business PartnersCDC in Des Moines, IA1-2.1%
Mountain West Small Business FinanceCDC in Salt Lake City, UT1-2.1%
Beacon Bank and TrustBrookline, MA1-2.1%
PNC Bank, National AssociationWilmington, DE1-2.1%
Small Business Growth CorporationCDC in Springfield, IL1-2.1%
Capital Access Group, Inc.CDC in San Francisco, CA1-2.1%

Approvals by fiscal year

FY2017 to FY2026

Approvals and gross approval amount by federal fiscal year. FY2026 is 1 October 2025 to 30 September 2026.

Spring and Wire Product Manufacturing: SBA 7(a) and 504 approvals by fiscal year
Fiscal year7(a) approvals7(a) dollarsMedian 7(a) approval504 approvals504 dollarsAll approvalsJobs supported, as reported
FY20264$2.0M$525K4$9.5M887
FY20256$5.7M$943K3$4.7M9125
FY20243$3.8M$250K4$10.8M7177
FY20238$13.6M$1.1M3$6.5M11140
FY20227$7.3M$1.0M6$11.5M13201
FY20219$10.2M$518K3$2.6M12264
FY202012$15.1M$787K2-14513
FY201910$6.6M$285K5$4.4M15252
FY20186$4.7M$350K2-8280
FY20177$4.0M$50K1-8132

SBA records the NAICS code in force when it approved a loan. The 2022 NAICS revision gave new codes to parts of retail trade and information. In FY2017 to FY2021 this code had 57 approvals.

States and franchise brands

FY2022 to FY2026
Spring and Wire Product Manufacturing: approvals by state
State of the businessApprovalsDollarsShare
Illinois8$13.9M16.7%
California6$16.8M12.5%
Ohio6$7.7M12.5%
Pennsylvania6$5.3M12.5%
New York5$6.1M10.4%
Indiana3$2.5M6.3%
Iowa2-4.2%
Utah2-4.2%
Arizona2-4.2%
Michigan2-4.2%
Idaho1-2.1%
Washington1-2.1%
Alabama1-2.1%
Minnesota1-2.1%
New Jersey1-2.1%

Loan sizes and interest rates

FY2022 to FY2026

The median 7(a) approval was $525K. The median for all industries was $170K. The industry had 45.7 approvals for each 1,000 establishments, from 1,051 establishments. The figure for all industries was 41.1.

Approvals by size

  • $50,001 to $150,0004.2%2
  • $150,001 to $350,00018.8%9
  • $350,001 to $1 million22.9%11
  • $1 million to $2 million25.0%12
  • Over $2 million29.2%14

Approvals by age of the business

  • Existing, more than 2 years old77.1%37
  • New business, 2 years or less6.3%3
  • Startup, loan funds will open the business4.2%2
  • Change of ownership12.5%6
Spring and Wire Product Manufacturing: median initial interest rate of 7(a) approvals by fiscal year
Fiscal yearThis industry, median initial rateLoans with a rateAll industries, median for the same year
FY2026-49.50%
FY2025-610.25%
FY2024-311.25%
FY2023-810.25%
FY2022-76.00%

The initial interest rate is the rate that the SBA file gives for a 7(a) loan at approval. A rate of a variable loan can change later. The site shows a median only when 20 or more loans have a rate. A hyphen means that the site does not show the figure.

Spring and Wire Product Manufacturing beside all industries
FY2022 to FY2026NAICS 3326All industries
Median 7(a) approval$525K$170K
Median 504 approval$1.7M$708K
Average approval$1.6M$557K
Approvals for each 1,000 establishments45.741.1
Approvals to franchise businesses0.0%11.0%
Jobs supported for each approval, as reported15.210.2

How earlier loans turned out

Loans approved FY2010 to FY2021

The site counts only loans approved five fiscal years ago or more. A newer loan has had little time to be paid in full or charged off.

Spring and Wire Product Manufacturing: loan status as SBA records it, beside all industries
Loans approved FY2010 to FY2021This industry, 7(a)All 7(a)This industry, 504All 504
Approvals in these years125639,9054285,591
Cancelled or not disbursed1079,304412,510
Disbursed loans115560,6013873,081
Paid in full94438,1232436,219
Charged off337,1900910
Not paid in full and not charged off (SBA does not disclose the status)1885,2881435,952
Charged off, share of disbursed loans2.6%6.6%0.0%1.2%
Dollars charged off, share of disbursed dollars0.2%2.5%0.0%0.9%
Dollars charged off$158K$5.77bn$0$498M
Spring and Wire Product Manufacturing, 7(a)2.6%
All industries, 7(a)6.6%
Spring and Wire Product Manufacturing, 5040.0%
All industries, 5041.2%
Share of disbursed loans approved FY2010 to FY2021 that SBA records as charged off.

What "charged off" means

Other parts of Fabricated Metal Product Manufacturing

FY2022 to FY2026

Official channels

These links open pages of the agencies. The site checked each address on .

Cite this page

SBA Ledger. SBA loans for spring and wire product manufacturing (NAICS 3326). https://sbaledger.com/industry/3326/

Source: U.S. Small Business Administration, 7(a) and 504 FOIA loan data. The SBA file gives approvals to . The address of this page does not change.

About these figures

The figures are totals of the SBA 7(a) and 504 FOIA loan files. The data date is . Loan status for approvals before FY2020 is from . SBA updates the files each quarter.

A count is a count of approvals, with the approvals that SBA cancelled later. The five-year window is FY2022 to FY2026. The charge-off share uses loans approved FY2010 to FY2021. SBA lists each loan under the lender that holds it today. The establishment counts are from County Business Patterns 2023 of the Census Bureau. The site shows a dollar figure only for three or more approvals. It names no borrower.

How the totals are made. Report an error. Glossary.

Questions

Which lenders had the most approvals for spring and wire product manufacturing?
These lenders had the most approvals in FY2022 to FY2026:
Which states had the most approvals for spring and wire product manufacturing?
These states had the most approvals in FY2022 to FY2026:
How large are the approvals for spring and wire product manufacturing?
The median 504 approval was $1.7M. The average approval across both programs was $1.6M. The average for all industries was $557K. Jobs supported, as reported on the loan application, were 15.2 for each approval.
What interest rate did 7(a) loans carry in this industry?
The site shows no median initial rate in this industry for FY2026. The rate needs 20 or more 7(a) approvals with a rate.