Industries › Manufacturing › Primary Metal Manufacturing › Iron and Steel Mills and Ferroalloy Manufacturing
NAICS 3311Industry group0.0% of all approvals
SBA loans for iron and steel mills and ferroalloy manufacturing
7(a) and 504 approvals to businesses SBA classifies under NAICS 3311, with the lenders and states behind them.
SBA approvals by fiscal year. The federal fiscal year runs 1 October to 30 September, so FY2025 is 1 October 2024 to 30 September 2025. *FY2026 is open: approvals to 30 Jun 2026 only.
Businesses classified under NAICS 3311, iron and steel mills and ferroalloy manufacturing, received 38 SBA loan approvals worth $30.5M in FY2021 to FY2025 (34 7(a), 4 504).
That is 0.0% of all approvals. Set against the 359 establishments the Census Bureau counts in the industry, it comes to 105.8 approvals per 1,000 establishments; across all industries the figure is 41.0.
In FY2025 there were 7 approvals, down 42% on FY2024. The median 7(a) approval was $225K, against $190K for all industries.
Of 7(a) loans approved in FY2010 to FY2021 and disbursed, SBA records 9.3% as charged off, above the 6.6% for all industries.
Loan status is as recorded by SBA at the data date; charge-off rates are computed on loans approved at least five fiscal years ago. Jobs supported are self-reported estimates from the SBA loan application, which SBA does not review, audit or validate. Data through 30 Jun 2026.
Volume by fiscal year
| Fiscal year | 7(a) approvals | 7(a) dollars | Median 7(a) | 504 approvals | 504 dollars | All approvals | Jobs supported, as reported |
|---|---|---|---|---|---|---|---|
| FY2026* | 3 | $1.7M | $350K | 1 | — | 4 | 29 |
| FY2025 | 5 | $1.1M | $250K | 2 | — | 7 | 32 |
| FY2024 | 12 | $6.4M | $175K | 0 | — | 12 | 162 |
| FY2023 | 4 | $3.0M | $363K | 0 | — | 4 | 25 |
| FY2022 | 6 | $2.5M | $317K | 0 | — | 6 | 42 |
| FY2021 | 7 | $8.2M | $437K | 2 | — | 9 | 204 |
| FY2020 | 6 | $4.5M | $628K | 1 | — | 7 | 232 |
| FY2019 | 8 | $2.6M | $95K | 3 | $3.3M | 11 | 107 |
| FY2018 | 11 | $2.1M | $150K | 0 | — | 11 | 85 |
| FY2017 | 9 | $960K | $50K | 0 | — | 9 | 49 |
| FY2016 | 7 | $11.1M | $250K | 1 | — | 8 | 91 |
SBA records the NAICS code in force when a loan was approved. The 2022 NAICS revision renumbered parts of retail trade and information, so some lines of business appear under one code before FY2023 and another after. FY2016–FY2020 approvals under this code: 46.
Lenders most active in this industry
By number of approvals, FY2021–FY2025; 24 lenders had at least one.
| # | Lender | Approvals | Dollars | Share | |
|---|---|---|---|---|---|
| 1 | The Huntington National BankColumbus, OH | 10 | $1.6M | 26.3% | |
| 2 | Old National BankEvansville, IN | 2 | — | 5.3% | |
| 3 | JPMorgan Chase Bank, National AssociationColumbus, OH | 2 | — | 5.3% | |
| 4 | Banner BankWalla Walla, WA | 2 | — | 5.3% | |
| 5 | First Financial BankCincinnati, OH | 2 | — | 5.3% | |
| 6 | Northeast BankLewiston, ME | 2 | — | 5.3% | |
| 7 | KeyBank National AssociationCleveland, OH | 1 | — | 2.6% | |
| 8 | Alloy Development Co., Inc.Cincinnati, OH · CDC | 1 | — | 2.6% | |
| 9 | EDC Finance CorporationLancaster, PA · CDC | 1 | — | 2.6% | |
| 10 | BOKF, National AssociationTulsa, OK | 1 | — | 2.6% | |
| 11 | United Business BankWalnut Creek, CA | 1 | — | 2.6% | |
| 12 | Small Business Growth CorporationSpringfield, IL · CDC | 1 | — | 2.6% | |
| 13 | Black Hawk Economic Development, Inc.Waterloo, IA · CDC | 1 | — | 2.6% | |
| 14 | Enterprise Bank & TrustClayton, MO | 1 | — | 2.6% | |
| 15 | Celtic Bank CorporationSalt Lake City, UT | 1 | — | 2.6% | |
| 16 | Harvest Small Business Finance, LLCLaguna Hills, CA | 1 | — | 2.6% | |
| 17 | Shoreham BankWarwick, RI | 1 | — | 2.6% | |
| 18 | Newtek Bank, National AssociationMiami, FL | 1 | — | 2.6% | |
| 19 | PNC Bank, National AssociationWilmington, DE | 1 | — | 2.6% | |
| 20 | U.S. Bank, National AssociationCincinnati, OH | 1 | — | 2.6% |
States
| # | State of the business | Approvals | Dollars | Share | |
|---|---|---|---|---|---|
| 1 | Ohio | 9 | $5.6M | 23.7% | |
| 2 | Michigan | 5 | $5.0M | 13.2% | |
| 3 | California | 5 | $3.4M | 13.2% | |
| 4 | Colorado | 3 | $2.3M | 7.9% | |
| 5 | Pennsylvania | 2 | — | 5.3% | |
| 6 | Washington | 2 | — | 5.3% | |
| 7 | Indiana | 2 | — | 5.3% | |
| 8 | New Jersey | 2 | — | 5.3% | |
| 9 | New York | 1 | — | 2.6% | |
| 10 | Illinois | 1 | — | 2.6% | |
| 11 | Iowa | 1 | — | 2.6% | |
| 12 | Wisconsin | 1 | — | 2.6% | |
| 13 | Kentucky | 1 | — | 2.6% | |
| 14 | South Carolina | 1 | — | 2.6% | |
| 15 | Arizona | 1 | — | 2.6% |
Approval sizes
- $50,000 or less18.4%7
- $50,001 to $150,00015.8%6
- $150,001 to $350,00026.3%10
- $350,001 to $1 million21.1%8
- $1 million to $2 million5.3%2
- Over $2 million13.2%5
Age of the businesses
- Existing, more than 2 years old68.4%26
- New business, 2 years or less13.2%5
- Startup, loan funds will open the business5.3%2
- Change of ownership13.2%5
Charge-offs against all industries
| Loans approved FY2010–FY2021 | This industry, 7(a) | All 7(a) | This industry, 504 | All 504 |
|---|---|---|---|---|
| Approvals in these years | 90 | 639,905 | 18 | 85,591 |
| Cancelled or never disbursed | 15 | 79,313 | 4 | 12,514 |
| Disbursed loans | 75 | 560,592 | 14 | 73,077 |
| Paid in full | 51 | 435,813 | 8 | 35,491 |
| Charged off | 7 | 36,891 | 0 | 905 |
| Still outstanding (status exempt from disclosure) | 17 | 87,888 | 6 | 36,681 |
| Charged off, share of disbursed loans | 9.3% | 6.6% | too few loans | 1.2% |
| Dollars charged off, share of disbursed dollars | 9.9% | 2.5% | too few loans | 0.9% |
| Dollars charged off | $3.3M | $5.70bn | — | $499M |
Against all industries
| FY2021–FY2025 | NAICS 3311 | All industries |
|---|---|---|
| Median 7(a) approval | $225K | $190K |
| Median 504 approval | $2.1M | $657K |
| Average approval | $803K | $573K |
| Approvals per 1,000 establishments | 105.8 | 41.0 |
| Approvals to franchise businesses | 0.0% | 11.2% |
| Jobs supported per approval, as reported | 12.2 | 10.5 |
Questions and answers
Which lenders make the most SBA loans for iron and steel mills and ferroalloy manufacturing?
By approvals in FY2021 to FY2025: The Huntington National Bank (10), Old National Bank (2), JPMorgan Chase Bank, National Association (2), Banner Bank (2), First Financial Bank (2). 24 lenders had at least one.
How large are typical SBA loans for iron and steel mills and ferroalloy manufacturing?
The median 7(a) approval was $225K and the median 504 approval $2.1M; the average across both programs was $803K.
What share of SBA loans for iron and steel mills and ferroalloy manufacturing are charged off?
Of 7(a) loans approved in FY2010 to FY2021 and disbursed, 9.3% are recorded as charged off, against 6.6% for all industries.
Which states have the most SBA loans for iron and steel mills and ferroalloy manufacturing?
Ohio (9), Michigan (5), California (5), Colorado (3), Pennsylvania (2).
Is SBA lending for iron and steel mills and ferroalloy manufacturing rising?
Approvals in the three latest complete fiscal years total 23, against 22 in the three before: broadly level (+5%).
About these figures
Figures are totals of the Small Business Administration's 7(a) and 504 FOIA loan files, data through 30 Jun 2026. SBA updates the files quarterly. Counts are loan approvals, including approvals later cancelled; the five-year window is FY2021–FY2025, the five latest complete fiscal years. Charge-off rates use only loans approved in FY2010–FY2021, at least five fiscal years ago, and count disbursed loans SBA records as charged off. Loans are listed under the lender they are assigned to today. Establishment counts are from the Census Bureau's County Business Patterns 2023, which leaves out most farms, government and businesses without employees. Dollar figures behind fewer than three approvals are not shown, and no borrower is named anywhere on this site.Methodology · Report an error