SBALedger

SBA loans for primary metal manufacturing

NAICS code
331
Level
Subsector
Approvals, FY2022 to FY2026
255
Median 7(a) approval
$300K

SBA approved 255 loans for primary metal manufacturing (NAICS 331) in FY2022 to FY2026, worth $258M. 205 are under the 7(a) program and 50 are under the 504 program. That is less than 0.1% of all approvals in the country.

In FY2026 the industry had 49 approvals, worth $64.2M. In FY2025 the industry had 51.

By approvals in FY2022 to FY2026, it was number 71 of 96 NAICS subsectors with 30 or more approvals. The position counts approvals. It is not a grade.

Approvals for the industry fell by 14.7%: 299 in FY2017 to FY2021 and 255 in FY2022 to FY2026. Approvals in the United States rose by 13.1%: 303,831 and 343,498. 10.6% of the approvals for the industry were in the size band $50,000 or less. The share for all industries was 22.9%.

Total Jobs Created + Jobs Retained as reported by lender on SBA Loan Application. SBA does not review, audit, or validate these numbers - they are simply self-reported, good faith estimates by the lender.

EXEMPT = The status of loans that have been disbursed but have not been cancelled, paid in full, or charged off are exempt from disclosure under FOIA Exemption 4

SBA's words. Source: U.S. Small Business Administration, 7(a) and 504 FOIA Data Dictionary, copied on .

In plain words: Jobs are estimates that SBA does not check. SBA does not disclose the status of a loan that is disbursed and not paid in full or charged off. The SBA file gives approvals to . Loan status for approvals before FY2020 is from the file of .

Lenders with the most approvals

FY2022 to FY2026

117 lenders had an approval in this industry. The number of approvals shows how active a lender is in the industry.

Primary Metal Manufacturing: lenders by number of approvals
LenderApprovalsDollarsShare
The Huntington National BankColumbus, OH38$21.1M14.9%
Newtek Bank, National AssociationMiami, FL9$12.8M3.5%
U.S. Bank, National AssociationCincinnati, OH8$5.5M3.1%
Wells Fargo Bank National AssociationSioux Falls, SD8$4.0M3.1%
BayFirst National BankSaint Petersburg, FL7$900K2.7%
Manufacturers and Traders Trust CompanyBuffalo, NY6$5.3M2.4%
Northeast BankLewiston, ME6$1.4M2.4%
WBD, Inc.CDC in Madison, WI5$12.8M2.0%
Empire State Certified Development CorporationCDC in Latham, NY5$9.8M2.0%
KeyBank National AssociationCleveland, OH5$6.5M2.0%
Fifth Third BankCincinnati, OH5$5.8M2.0%
Community Banks of Colorado, A Division of NBH BankGreenwood Village, CO5$3.6M2.0%
TD Bank, National AssociationWilmington, DE5$2.3M2.0%
Live Oak Banking CompanyWilmington, NC4$7.4M1.6%
Small Business Growth CorporationCDC in Springfield, IL3$5.0M1.2%
Byline BankChicago, IL3$3.8M1.2%
First Bank of the LakeOsage Beach, MO3$2.7M1.2%
JPMorgan Chase Bank, National AssociationColumbus, OH3$1.1M1.2%
First Commonwealth BankIndiana, PA3$1.1M1.2%
SomerCor 504, Inc.CDC in Chicago, IL2-0.8%

Approvals by fiscal year

FY2017 to FY2026

Approvals and gross approval amount by federal fiscal year. FY2026 is 1 October 2025 to 30 September 2026.

Primary Metal Manufacturing: SBA 7(a) and 504 approvals by fiscal year
Fiscal year7(a) approvals7(a) dollarsMedian 7(a) approval504 approvals504 dollarsAll approvalsJobs supported, as reported
FY202637$39.2M$475K12$25.0M49801
FY202540$41.6M$338K11$31.2M511,042
FY202455$35.7M$250K9$11.6M64705
FY202339$24.7M$192K6$8.8M45492
FY202234$25.2M$350K12$14.4M46686
FY202137$39.2M$674K10$12.2M471,056
FY202046$39.2M$461K12$14.5M58837
FY201939$16.6M$200K18$21.0M57690
FY201856$23.7M$150K9$13.3M65689
FY201757$33.3M$206K15$13.2M721,046

SBA records the NAICS code in force when it approved a loan. The 2022 NAICS revision gave new codes to parts of retail trade and information. In FY2017 to FY2021 this code had 299 approvals.

Parts of this subsector

FY2022 to FY2026
Primary Metal Manufacturing: approvals by industry group
NAICSIndustry groupApprovalsShare
3312Steel Product Manufacturing from Purchased Steel13352.2%
3315Foundries4116.1%
3311Iron and Steel Mills and Ferroalloy Manufacturing3513.7%
3313Alumina and Aluminum Production and Processing2610.2%
3314Nonferrous Metal (except Aluminum) Production and Processing207.8%

States and franchise brands

FY2022 to FY2026
Primary Metal Manufacturing: approvals by state
State of the businessApprovalsDollarsShare
Ohio26$22.0M10.2%
California24$16.0M9.4%
Texas19$36.5M7.5%
Michigan18$8.1M7.1%
New York17$13.3M6.7%
Minnesota16$12.8M6.3%
Pennsylvania14$9.6M5.5%
Wisconsin12$23.7M4.7%
Indiana11$18.4M4.3%
Utah10$9.1M3.9%
Florida10$6.8M3.9%
Washington8$6.2M3.1%
Illinois7$16.4M2.7%
Oregon7$5.4M2.7%
Massachusetts6$6.5M2.4%

Loan sizes and interest rates

FY2022 to FY2026

The median 7(a) approval was $300K. The median for all industries was $170K. The industry had 71.4 approvals for each 1,000 establishments, from 3,570 establishments. The figure for all industries was 41.1.

Approvals by size

  • $50,000 or less10.6%27
  • $50,001 to $150,00014.5%37
  • $150,001 to $350,00026.3%67
  • $350,001 to $1 million21.6%55
  • $1 million to $2 million10.6%27
  • Over $2 million16.5%42

Approvals by age of the business

  • Existing, more than 2 years old77.6%198
  • New business, 2 years or less9.0%23
  • Startup, loan funds will open the business5.9%15
  • Change of ownership7.5%19
Primary Metal Manufacturing: median initial interest rate of 7(a) approvals by fiscal year
Fiscal yearThis industry, median initial rateLoans with a rateAll industries, median for the same year
FY20268.75%379.50%
FY20259.88%4010.25%
FY202410.50%5511.25%
FY20239.75%3910.25%
FY20225.88%346.00%

The initial interest rate is the rate that the SBA file gives for a 7(a) loan at approval. A rate of a variable loan can change later. The site shows a median only when 20 or more loans have a rate. A hyphen means that the site does not show the figure.

Primary Metal Manufacturing beside all industries
FY2022 to FY2026NAICS 331All industries
Median 7(a) approval$300K$170K
Median 504 approval$1.0M$708K
Average approval$1.0M$557K
Approvals for each 1,000 establishments71.441.1
Approvals to franchise businesses0.0%11.0%
Jobs supported for each approval, as reported14.610.2

How earlier loans turned out

Loans approved FY2010 to FY2021

The site counts only loans approved five fiscal years ago or more. A newer loan has had little time to be paid in full or charged off.

Primary Metal Manufacturing: loan status as SBA records it, beside all industries
Loans approved FY2010 to FY2021This industry, 7(a)All 7(a)This industry, 504All 504
Approvals in these years739639,90515385,591
Cancelled or not disbursed9879,3042412,510
Disbursed loans641560,60112973,081
Paid in full522438,1236836,219
Charged off3837,1904910
Not paid in full and not charged off (SBA does not disclose the status)8185,2885735,952
Charged off, share of disbursed loans5.9%6.6%3.1%1.2%
Dollars charged off, share of disbursed dollars3.1%2.5%2.5%0.9%
Dollars charged off$12.0M$5.77bn$2.9M$498M
Primary Metal Manufacturing, 7(a)5.9%
All industries, 7(a)6.6%
Primary Metal Manufacturing, 5043.1%
All industries, 5041.2%
Share of disbursed loans approved FY2010 to FY2021 that SBA records as charged off.

What "charged off" means

Other parts of Manufacturing

FY2022 to FY2026

Official channels

These links open pages of the agencies. The site checked each address on .

Cite this page

SBA Ledger. SBA loans for primary metal manufacturing (NAICS 331). https://sbaledger.com/industry/331/

Source: U.S. Small Business Administration, 7(a) and 504 FOIA loan data. The SBA file gives approvals to . The address of this page does not change.

About these figures

The figures are totals of the SBA 7(a) and 504 FOIA loan files. The data date is . Loan status for approvals before FY2020 is from . SBA updates the files each quarter.

A count is a count of approvals, with the approvals that SBA cancelled later. The five-year window is FY2022 to FY2026. The charge-off share uses loans approved FY2010 to FY2021. SBA lists each loan under the lender that holds it today. The establishment counts are from County Business Patterns 2023 of the Census Bureau. The site shows a dollar figure only for three or more approvals. It names no borrower.

How the totals are made. Report an error. Glossary.

Questions

Which lenders had the most approvals for primary metal manufacturing?
These lenders had the most approvals in FY2022 to FY2026:
Which states had the most approvals for primary metal manufacturing?
These states had the most approvals in FY2022 to FY2026:
How large are the approvals for primary metal manufacturing?
The median 504 approval was $1.0M. The average approval across both programs was $1.0M. The average for all industries was $557K. Jobs supported, as reported on the loan application, were 14.6 for each approval.
What interest rate did 7(a) loans carry in this industry?
The median initial interest rate of 7(a) approvals in this industry in FY2026 was 8.75%, from 37 approvals. The median for all industries in FY2026 was 9.50%. The rate moved much between years, so the site gives one year.