SBA loans for cutlery and handtool manufacturing
- NAICS code
- 3322
- Level
- Industry group
- Approvals, FY2022 to FY2026
- 59
- Median 7(a) approval
- $287K
SBA approved 59 loans for cutlery and handtool manufacturing (NAICS 3322) in FY2022 to FY2026, worth $51.6M. 57 are under the 7(a) program and 2 are under the 504 program. That is less than 0.1% of all approvals in the country.
In FY2026 the industry had 19 approvals, worth $20.2M. In FY2025 the industry had 18.
By approvals in FY2022 to FY2026, it was number 243 of 279 NAICS industry groups with 30 or more approvals. The position counts approvals. It is not a grade.
Approvals for the industry fell by 9.2%: 65 in FY2017 to FY2021 and 59 in FY2022 to FY2026. Approvals in the United States rose by 13.1%: 303,831 and 343,498. 10.2% of the approvals for the industry were in the size band $50,001 to $150,000. The share for all industries was 21.7%.
Total Jobs Created + Jobs Retained as reported by lender on SBA Loan Application. SBA does not review, audit, or validate these numbers - they are simply self-reported, good faith estimates by the lender.
EXEMPT = The status of loans that have been disbursed but have not been cancelled, paid in full, or charged off are exempt from disclosure under FOIA Exemption 4
SBA's words. Source: U.S. Small Business Administration, 7(a) and 504 FOIA Data Dictionary, copied on .
In plain words: Jobs are estimates that SBA does not check. SBA does not disclose the status of a loan that is disbursed and not paid in full or charged off. The SBA file gives approvals to . Loan status for approvals before FY2020 is from the file of .
Lenders with the most approvals
FY2022 to FY202635 lenders had an approval in this industry. The number of approvals shows how active a lender is in the industry.
| Lender | Approvals | Dollars | Share |
|---|---|---|---|
| Northeast BankLewiston, ME | 7 | $1.1M | 11.9% |
| Northwest BankWarren, PA | 4 | $7.2M | 6.8% |
| The Huntington National BankColumbus, OH | 4 | $2.5M | 6.8% |
| Zions Bancorporation, National AssociationSalt Lake City, UT | 3 | $1.4M | 5.1% |
| JPMorgan Chase Bank, National AssociationColumbus, OH | 3 | $880K | 5.1% |
| Ameris BankAtlanta, GA | 2 | - | 3.4% |
| CalPrivate BankLa Jolla, CA | 2 | - | 3.4% |
| Pinnacle BankNashville, TN | 2 | - | 3.4% |
| Rockland Trust CompanyRockland, MA | 2 | - | 3.4% |
| First Interstate BankBillings, MT | 2 | - | 3.4% |
| BayFirst National BankSaint Petersburg, FL | 2 | - | 3.4% |
| WaFd BankSeattle, WA | 2 | - | 3.4% |
| Arrow Bank National AssociationGlens Falls, NY | 2 | - | 3.4% |
| The Mortgage Capital Development CorporationCDC in Oakland, CA | 1 | - | 1.7% |
| American Business BankAnaheim, CA | 1 | - | 1.7% |
| GBC International BankLos Angeles, CA | 1 | - | 1.7% |
| California Statewide Certified Development CorporationCDC in Davis, CA | 1 | - | 1.7% |
| Celtic Bank CorporationSalt Lake City, UT | 1 | - | 1.7% |
| CCFBank National AssociationAltoona, WI | 1 | - | 1.7% |
| Live Oak Banking CompanyWilmington, NC | 1 | - | 1.7% |
Approvals by fiscal year
FY2017 to FY2026Approvals and gross approval amount by federal fiscal year. FY2026 is 1 October 2025 to 30 September 2026.
| Fiscal year | 7(a) approvals | 7(a) dollars | Median 7(a) approval | 504 approvals | 504 dollars | All approvals | Jobs supported, as reported |
|---|---|---|---|---|---|---|---|
| FY2026 | 19 | $20.2M | $489K | 0 | - | 19 | 380 |
| FY2025 | 16 | $8.4M | $269K | 2 | - | 18 | 163 |
| FY2024 | 7 | $4.1M | $100K | 0 | - | 7 | 16 |
| FY2023 | 10 | $3.1M | $250K | 0 | - | 10 | 53 |
| FY2022 | 5 | $10.5M | $350K | 0 | - | 5 | 269 |
| FY2021 | 12 | $11.2M | $305K | 0 | - | 12 | 263 |
| FY2020 | 12 | $3.2M | $188K | 0 | - | 12 | 63 |
| FY2019 | 8 | $854K | $70K | 1 | - | 9 | 49 |
| FY2018 | 13 | $2.8M | $103K | 1 | - | 14 | 46 |
| FY2017 | 16 | $6.0M | $213K | 2 | - | 18 | 289 |
SBA records the NAICS code in force when it approved a loan. The 2022 NAICS revision gave new codes to parts of retail trade and information. In FY2017 to FY2021 this code had 65 approvals.
States and franchise brands
FY2022 to FY2026| State of the business | Approvals | Dollars | Share |
|---|---|---|---|
| California | 8 | $17.7M | 13.6% |
| North Carolina | 5 | $11.6M | 8.5% |
| Pennsylvania | 5 | $7.4M | 8.5% |
| New York | 5 | $447K | 8.5% |
| Texas | 4 | $2.3M | 6.8% |
| Utah | 4 | $1.4M | 6.8% |
| Washington | 3 | $947K | 5.1% |
| Tennessee | 2 | - | 3.4% |
| Maine | 2 | - | 3.4% |
| Massachusetts | 2 | - | 3.4% |
| Colorado | 2 | - | 3.4% |
| Illinois | 2 | - | 3.4% |
| Virginia | 2 | - | 3.4% |
| Connecticut | 2 | - | 3.4% |
| Michigan | 2 | - | 3.4% |
Loan sizes and interest rates
FY2022 to FY2026The median 7(a) approval was $287K. The median for all industries was $170K. The industry had 60.2 approvals for each 1,000 establishments, from 980 establishments. The figure for all industries was 41.1.
Approvals by size
- $50,000 or less20.3%12
- $50,001 to $150,00010.2%6
- $150,001 to $350,00023.7%14
- $350,001 to $1 million23.7%14
- $1 million to $2 million6.8%4
- Over $2 million15.3%9
Approvals by age of the business
- Existing, more than 2 years old67.8%40
- New business, 2 years or less20.3%12
- Startup, loan funds will open the business1.7%1
- Change of ownership10.2%6
| Fiscal year | This industry, median initial rate | Loans with a rate | All industries, median for the same year |
|---|---|---|---|
| FY2026 | - | 19 | 9.50% |
| FY2025 | - | 16 | 10.25% |
| FY2024 | - | 7 | 11.25% |
| FY2023 | - | 10 | 10.25% |
| FY2022 | - | 5 | 6.00% |
The initial interest rate is the rate that the SBA file gives for a 7(a) loan at approval. A rate of a variable loan can change later. The site shows a median only when 20 or more loans have a rate. A hyphen means that the site does not show the figure.
| FY2022 to FY2026 | NAICS 3322 | All industries |
|---|---|---|
| Median 7(a) approval | $287K | $170K |
| Median 504 approval | - | $708K |
| Average approval | $875K | $557K |
| Approvals for each 1,000 establishments | 60.2 | 41.1 |
| Approvals to franchise businesses | 0.0% | 11.0% |
| Jobs supported for each approval, as reported | 14.9 | 10.2 |
How earlier loans turned out
Loans approved FY2010 to FY2021The site counts only loans approved five fiscal years ago or more. A newer loan has had little time to be paid in full or charged off.
| Loans approved FY2010 to FY2021 | This industry, 7(a) | All 7(a) | This industry, 504 | All 504 |
|---|---|---|---|---|
| Approvals in these years | 171 | 639,905 | 15 | 85,591 |
| Cancelled or not disbursed | 22 | 79,304 | 2 | 12,510 |
| Disbursed loans | 149 | 560,601 | 13 | 73,081 |
| Paid in full | 111 | 438,123 | 10 | 36,219 |
| Charged off | 10 | 37,190 | 0 | 910 |
| Not paid in full and not charged off (SBA does not disclose the status) | 28 | 85,288 | 3 | 35,952 |
| Charged off, share of disbursed loans | 6.7% | 6.6% | Too few loans | 1.2% |
| Dollars charged off, share of disbursed dollars | 2.3% | 2.5% | Too few loans | 0.9% |
| Dollars charged off | $1.4M | $5.77bn | Too few loans | $498M |
Other parts of Fabricated Metal Product Manufacturing
FY2022 to FY2026- Forging and Stamping83
- Architectural and Structural Metals Manufacturing950
- Boiler, Tank, and Shipping Container Manufacturing50
- Hardware Manufacturing55
- Spring and Wire Product Manufacturing48
- Machine Shops; Turned Product; and Screw, Nut, and Bolt Manufacturing1,159
- Coating, Engraving, Heat Treating, and Allied Activities336
- Other Fabricated Metal Product Manufacturing950
Official channels
- SBA Lender MatchThe SBA tool that matches a small business with an SBA-approved lender.
- SBA 7(a) loansThe SBA page about the 7(a) loan program.
- SBA 504 loansThe SBA page about the 504 loan program.
These links open pages of the agencies. The site checked each address on .
Cite this page
SBA Ledger. SBA loans for cutlery and handtool manufacturing (NAICS 3322). https://sbaledger.com/industry/3322/
Source: U.S. Small Business Administration, 7(a) and 504 FOIA loan data. The SBA file gives approvals to . The address of this page does not change.
About these figures
The figures are totals of the SBA 7(a) and 504 FOIA loan files. The data date is . Loan status for approvals before FY2020 is from . SBA updates the files each quarter.
A count is a count of approvals, with the approvals that SBA cancelled later. The five-year window is FY2022 to FY2026. The charge-off share uses loans approved FY2010 to FY2021. SBA lists each loan under the lender that holds it today. The establishment counts are from County Business Patterns 2023 of the Census Bureau. The site shows a dollar figure only for three or more approvals. It names no borrower.
Questions
- Which lenders had the most approvals for cutlery and handtool manufacturing?
- These lenders had the most approvals in FY2022 to FY2026:
- Northeast Bank: 7 approvals
- Northwest Bank: 4 approvals
- The Huntington National Bank: 4 approvals
- Zions Bancorporation, National Association: 3 approvals
- JPMorgan Chase Bank, National Association: 3 approvals
- Which states had the most approvals for cutlery and handtool manufacturing?
- These states had the most approvals in FY2022 to FY2026:
- California: 8 approvals
- North Carolina: 5 approvals
- Pennsylvania: 5 approvals
- New York: 5 approvals
- Texas: 4 approvals
- How large are the approvals for cutlery and handtool manufacturing?
- The average approval across both programs was $875K. The average for all industries was $557K. Jobs supported, as reported on the loan application, were 14.9 for each approval.
- What interest rate did 7(a) loans carry in this industry?
- The site shows no median initial rate in this industry for FY2026. The rate needs 20 or more 7(a) approvals with a rate.