SBALedger

SBA loans for architectural and structural metals manufacturing

NAICS code
3323
Level
Industry group
Approvals, FY2022 to FY2026
950
Median 7(a) approval
$261K

SBA approved 950 loans for architectural and structural metals manufacturing (NAICS 3323) in FY2022 to FY2026, worth $792M. 778 are under the 7(a) program and 172 are under the 504 program. That is 0.3% of all approvals in the country.

In FY2026 the industry had 208 approvals, worth $207M. In FY2025 the industry had 208.

By approvals in FY2022 to FY2026, it was number 73 of 279 NAICS industry groups with 30 or more approvals. The position counts approvals. It is not a grade.

Approvals for the industry rose by 5.8%: 898 in FY2017 to FY2021 and 950 in FY2022 to FY2026. Approvals in the United States rose by 13.1%: 303,831 and 343,498. 13.6% of the approvals for the industry were in the size band $50,000 or less. The share for all industries was 22.9%.

Total Jobs Created + Jobs Retained as reported by lender on SBA Loan Application. SBA does not review, audit, or validate these numbers - they are simply self-reported, good faith estimates by the lender.

EXEMPT = The status of loans that have been disbursed but have not been cancelled, paid in full, or charged off are exempt from disclosure under FOIA Exemption 4

SBA's words. Source: U.S. Small Business Administration, 7(a) and 504 FOIA Data Dictionary, copied on .

In plain words: Jobs are estimates that SBA does not check. SBA does not disclose the status of a loan that is disbursed and not paid in full or charged off. The SBA file gives approvals to . Loan status for approvals before FY2020 is from the file of .

Lenders with the most approvals

FY2022 to FY2026

268 lenders had an approval in this industry. The number of approvals shows how active a lender is in the industry.

Architectural and Structural Metals Manufacturing: lenders by number of approvals
LenderApprovalsDollarsShare
Newtek Bank, National AssociationMiami, FL62$43.1M6.5%
The Huntington National BankColumbus, OH42$15.4M4.4%
TD Bank, National AssociationWilmington, DE37$6.1M3.9%
U.S. Bank, National AssociationCincinnati, OH36$17.3M3.8%
Manufacturers and Traders Trust CompanyBuffalo, NY27$11.8M2.8%
Northeast BankLewiston, ME25$4.5M2.6%
Zions Bancorporation, National AssociationSalt Lake City, UT21$5.5M2.2%
JPMorgan Chase Bank, National AssociationColumbus, OH19$4.5M2.0%
Wells Fargo Bank National AssociationSioux Falls, SD15$4.6M1.6%
The Mortgage Capital Development CorporationCDC in Oakland, CA14$28.3M1.5%
Readycap Lending, LLCBerkeley Heights, NJ13$3.9M1.4%
Live Oak Banking CompanyWilmington, NC12$19.1M1.3%
Newtek Small Business Finance, LLCLake Success, NY12$15.3M1.3%
BayFirst National BankSaint Petersburg, FL12$4.7M1.3%
Lendistry SBLC, LLCLos Angeles, CA12$3.1M1.3%
Bank of America, National AssociationCharlotte, NC11$10.3M1.2%
Columbia BankLake Oswego, OR11$1.9M1.2%
Business Finance CapitalCDC in Los Angeles, CA10$14.4M1.1%
Banco Popular de Puerto RicoSan Juan, PR10$897K1.1%
First Bank of the LakeOsage Beach, MO9$20.0M0.9%

Approvals by fiscal year

FY2017 to FY2026

Approvals and gross approval amount by federal fiscal year. FY2026 is 1 October 2025 to 30 September 2026.

Architectural and Structural Metals Manufacturing: SBA 7(a) and 504 approvals by fiscal year
Fiscal year7(a) approvals7(a) dollarsMedian 7(a) approval504 approvals504 dollarsAll approvalsJobs supported, as reported
FY2026179$165M$350K29$42.5M2082,952
FY2025184$108M$250K24$26.1M2082,110
FY2024161$104M$250K30$41.5M1912,404
FY2023122$93.8M$300K33$47.5M1551,802
FY2022132$88.6M$256K56$75.0M1882,382
FY2021154$169M$500K50$59.5M2043,257
FY2020118$85.5M$255K43$42.0M1611,959
FY2019130$93.4M$349K31$24.6M1612,099
FY2018149$121M$295K41$43.7M1903,602
FY2017153$78.7M$225K29$26.8M1822,366

SBA records the NAICS code in force when it approved a loan. The 2022 NAICS revision gave new codes to parts of retail trade and information. In FY2017 to FY2021 this code had 898 approvals.

States and franchise brands

FY2022 to FY2026
Architectural and Structural Metals Manufacturing: approvals by state
State of the businessApprovalsDollarsShare
California105$94.8M11.1%
Florida72$70.7M7.6%
Texas56$64.9M5.9%
New York46$25.3M4.8%
Pennsylvania41$27.6M4.3%
Washington37$22.0M3.9%
Ohio36$11.1M3.8%
Michigan33$33.1M3.5%
Colorado31$28.4M3.3%
Illinois30$33.2M3.2%
Utah29$25.2M3.1%
Minnesota28$21.7M2.9%
Wisconsin27$23.0M2.8%
New Jersey25$18.8M2.6%
Missouri24$31.5M2.5%
Architectural and Structural Metals Manufacturing: approvals by franchise brand
Franchise brandApprovalsShare
Sunburst Shutters10.1%
Wallaby Windows10.1%

0.2% of the approvals have a franchise code.

Loan sizes and interest rates

FY2022 to FY2026

The median 7(a) approval was $261K. The median for all industries was $170K. The industry had 65.4 approvals for each 1,000 establishments, from 14,533 establishments. The figure for all industries was 41.1.

Approvals by size

  • $50,000 or less13.6%129
  • $50,001 to $150,00017.7%168
  • $150,001 to $350,00020.1%191
  • $350,001 to $1 million23.4%222
  • $1 million to $2 million13.1%124
  • Over $2 million12.2%116

Approvals by age of the business

  • Existing, more than 2 years old65.7%624
  • New business, 2 years or less14.9%142
  • Startup, loan funds will open the business7.8%74
  • Change of ownership11.6%110
Architectural and Structural Metals Manufacturing: median initial interest rate of 7(a) approvals by fiscal year
Fiscal yearThis industry, median initial rateLoans with a rateAll industries, median for the same year
FY20268.75%1799.50%
FY202510.25%18410.25%
FY202411.00%16111.25%
FY20239.75%12210.25%
FY20226.00%1316.00%

The initial interest rate is the rate that the SBA file gives for a 7(a) loan at approval. A rate of a variable loan can change later. The site shows a median only when 20 or more loans have a rate. A hyphen means that the site does not show the figure.

Architectural and Structural Metals Manufacturing beside all industries
FY2022 to FY2026NAICS 3323All industries
Median 7(a) approval$261K$170K
Median 504 approval$839K$708K
Average approval$834K$557K
Approvals for each 1,000 establishments65.441.1
Approvals to franchise businesses0.2%11.0%
Jobs supported for each approval, as reported12.310.2

How earlier loans turned out

Loans approved FY2010 to FY2021

The site counts only loans approved five fiscal years ago or more. A newer loan has had little time to be paid in full or charged off.

Architectural and Structural Metals Manufacturing: loan status as SBA records it, beside all industries
Loans approved FY2010 to FY2021This industry, 7(a)All 7(a)This industry, 504All 504
Approvals in these years1,769639,90544785,591
Cancelled or not disbursed21379,3045512,510
Disbursed loans1,556560,60139273,081
Paid in full1,255438,12319736,219
Charged off7037,1906910
Not paid in full and not charged off (SBA does not disclose the status)23185,28818935,952
Charged off, share of disbursed loans4.5%6.6%1.5%1.2%
Dollars charged off, share of disbursed dollars1.4%2.5%0.5%0.9%
Dollars charged off$13.8M$5.77bn$1.7M$498M
Architectural and Structural Metals Manufacturing, 7(a)4.5%
All industries, 7(a)6.6%
Architectural and Structural Metals Manufacturing, 5041.5%
All industries, 5041.2%
Share of disbursed loans approved FY2010 to FY2021 that SBA records as charged off.

What "charged off" means

Other parts of Fabricated Metal Product Manufacturing

FY2022 to FY2026

Official channels

These links open pages of the agencies. The site checked each address on .

Cite this page

SBA Ledger. SBA loans for architectural and structural metals manufacturing (NAICS 3323). https://sbaledger.com/industry/3323/

Source: U.S. Small Business Administration, 7(a) and 504 FOIA loan data. The SBA file gives approvals to . The address of this page does not change.

About these figures

The figures are totals of the SBA 7(a) and 504 FOIA loan files. The data date is . Loan status for approvals before FY2020 is from . SBA updates the files each quarter.

A count is a count of approvals, with the approvals that SBA cancelled later. The five-year window is FY2022 to FY2026. The charge-off share uses loans approved FY2010 to FY2021. SBA lists each loan under the lender that holds it today. The establishment counts are from County Business Patterns 2023 of the Census Bureau. The site shows a dollar figure only for three or more approvals. It names no borrower.

How the totals are made. Report an error. Glossary.

Questions

Which lenders had the most approvals for architectural and structural metals manufacturing?
These lenders had the most approvals in FY2022 to FY2026:
Which states had the most approvals for architectural and structural metals manufacturing?
These states had the most approvals in FY2022 to FY2026:
How large are the approvals for architectural and structural metals manufacturing?
The median 504 approval was $839K. The average approval across both programs was $834K. The average for all industries was $557K. Jobs supported, as reported on the loan application, were 12.3 for each approval.
What interest rate did 7(a) loans carry in this industry?
The median initial interest rate of 7(a) approvals in this industry in FY2026 was 8.75%, from 179 approvals. The median for all industries in FY2026 was 9.50%. The rate moved much between years, so the site gives one year.