SBA Ledger

Industries › Manufacturing › Fabricated Metal Product Manufacturing › Machine Shops; Turned Product; and Screw, Nut, and Bolt Manufacturing

NAICS 3327Industry group0.4% of all approvals

SBA loans for machine shops; turned product; and screw, nut, and bolt manufacturing

7(a) and 504 approvals to businesses SBA classifies under NAICS 3327, with the lenders and states behind them.

SBA approvals by fiscal year. The federal fiscal year runs 1 October to 30 September, so FY2025 is 1 October 2024 to 30 September 2025. *FY2026 is open: approvals to 30 Jun 2026 only.

SBA approved 1,227 loans to businesses in machine shops; turned product; and screw, nut, and bolt manufacturing (NAICS 3327) in FY2021 to FY2025, worth $991M: 1,002 under 7(a) and 225 under 504.

That is 0.4% of all approvals. Set against the 21,774 establishments the Census Bureau counts in the industry, it comes to 56.4 approvals per 1,000 establishments; across all industries the figure is 41.0.

In FY2025 there were 228 approvals, about level with FY2024. The median 7(a) approval was $301K, against $190K for all industries.

Of 7(a) loans approved in FY2010 to FY2021 and disbursed, SBA records 4.9% as charged off, below the 6.6% for all industries.

1,227approvals, FY2021–FY2025FY2025: 228
$991Mdollars approved, FY2021–FY2025FY2025: $184M
$301Kmedian 7(a) approvalall industries: $190K
56.4approvals per 1,000 establishmentsall industries: 41.0
4.9%7(a) loans approved FY2010–FY2021 charged offall industries: 6.6%

Loan status is as recorded by SBA at the data date; charge-off rates are computed on loans approved at least five fiscal years ago. Jobs supported are self-reported estimates from the SBA loan application, which SBA does not review, audit or validate. Data through 30 Jun 2026.

Volume by fiscal year

Fiscal year7(a) approvals7(a) dollarsMedian 7(a)504 approvals504 dollarsAll approvalsJobs supported, as reported
FY2026*140$112M$278K29$33.8M1691,760
FY2025204$163M$274K24$20.9M2282,469
FY2024184$143M$250K32$37.8M2162,618
FY2023186$136M$275K36$38.4M2222,507
FY2022184$127M$300K51$51.3M2353,064
FY2021244$212M$400K82$61.0M3263,997
FY2020179$136M$350K59$51.8M2383,222
FY2019220$156M$295K33$36.1M2533,008
FY2018221$149M$300K40$35.0M2613,416
FY2017243$128M$223K53$45.9M2963,226
FY2016285$152M$163K43$27.0M3284,049

SBA records the NAICS code in force when a loan was approved. The 2022 NAICS revision renumbered parts of retail trade and information, so some lines of business appear under one code before FY2023 and another after. FY2016–FY2020 approvals under this code: 1,376.

Lenders most active in this industry

By number of approvals, FY2021–FY2025; 338 lenders had at least one.

#LenderApprovalsDollarsShare
1The Huntington National BankColumbus, OH127$55.2M10.4%
2U.S. Bank, National AssociationCincinnati, OH52$34.7M4.2%
3BayFirst National BankSaint Petersburg, FL23$3.2M1.9%
4Byline BankChicago, IL19$32.6M1.5%
5Granite State Economic Development CorporationPortsmouth, NH · CDC19$3.5M1.5%
6Live Oak Banking CompanyWilmington, NC18$36.2M1.5%
7TD Bank, National AssociationWilmington, DE18$4.4M1.5%
8WBD, Inc.Madison, WI · CDC16$15.3M1.3%
9Newtek Bank, National AssociationMiami, FL16$9.3M1.3%
10Bank of America, National AssociationCharlotte, NC15$7.3M1.2%
11Business Finance CapitalLos Angeles, CA · CDC14$18.9M1.1%
12JPMorgan Chase Bank, National AssociationColumbus, OH14$6.2M1.1%
13Manufacturers and Traders Trust CompanyBuffalo, NY14$2.4M1.1%
14Zions Bank, A Division ofSalt Lake City, UT13$10.6M1.1%
15Mortgage Capital Development CorporationOakland, CA · CDC12$20.5M1.0%
16BankVistaSartell, MN12$10.6M1.0%
17Columbia BankLake Oswego, OR12$9.2M1.0%
18PNC Bank, National AssociationWilmington, DE12$8.8M1.0%
19KeyBank National AssociationCleveland, OH11$5.4M0.9%
20Wells Fargo Bank National AssociationSioux Falls, SD11$3.6M0.9%

States

#State of the businessApprovalsDollarsShare
1California166$177M13.5%
2Ohio122$55.4M9.9%
3Wisconsin92$74.1M7.5%
4Illinois76$74.0M6.2%
5Minnesota76$64.5M6.2%
6Michigan71$37.0M5.8%
7Texas57$63.4M4.6%
8Pennsylvania45$36.2M3.7%
9New York45$34.7M3.7%
10Massachusetts43$15.2M3.5%
11Florida37$32.6M3.0%
12Colorado34$31.7M2.8%
13Arizona30$23.8M2.4%
14Indiana30$23.5M2.4%
15Connecticut25$11.6M2.0%

Approval sizes

Age of the businesses

Charge-offs against all industries

Machine Shops; Turned Product; and Screw, Nut, and Bolt Manufacturing, 7(a)4.9%
All industries, 7(a)6.6%
Machine Shops; Turned Product; and Screw, Nut, and Bolt Manufacturing, 5041.8%
All industries, 5041.2%
Share of disbursed loans approved FY2010–FY2021 that SBA records as charged off.
Loans approved FY2010–FY2021This industry, 7(a)All 7(a)This industry, 504All 504
Approvals in these years3,177639,90576985,591
Cancelled or never disbursed38479,3138712,514
Disbursed loans2,793560,59268273,077
Paid in full2,201435,81335335,491
Charged off13836,89112905
Still outstanding (status exempt from disclosure)45487,88831736,681
Charged off, share of disbursed loans4.9%6.6%1.8%1.2%
Dollars charged off, share of disbursed dollars2.4%2.5%0.9%0.9%
Dollars charged off$37.4M$5.70bn$4.1M$499M

Against all industries

FY2021–FY2025NAICS 3327All industries
Median 7(a) approval$301K$190K
Median 504 approval$706K$657K
Average approval$807K$573K
Approvals per 1,000 establishments56.441.0
Approvals to franchise businesses0.0%11.2%
Jobs supported per approval, as reported11.910.5

Questions and answers

Which lenders make the most SBA loans for machine shops; turned product; and screw, nut, and bolt manufacturing?

By approvals in FY2021 to FY2025: The Huntington National Bank (127), U.S. Bank, National Association (52), BayFirst National Bank (23), Byline Bank (19), Granite State Economic Development Corporation (19). 338 lenders had at least one.

How large are typical SBA loans for machine shops; turned product; and screw, nut, and bolt manufacturing?

The median 7(a) approval was $301K and the median 504 approval $706K; the average across both programs was $807K.

What share of SBA loans for machine shops; turned product; and screw, nut, and bolt manufacturing are charged off?

Of 7(a) loans approved in FY2010 to FY2021 and disbursed, 4.9% are recorded as charged off, against 6.6% for all industries; for 504 loans, 1.8% against 1.2%.

Which states have the most SBA loans for machine shops; turned product; and screw, nut, and bolt manufacturing?

California (166), Ohio (122), Wisconsin (92), Illinois (76), Minnesota (76).

Is SBA lending for machine shops; turned product; and screw, nut, and bolt manufacturing rising?

Approvals in the three latest complete fiscal years total 666, against 799 in the three before: falling (-17%).

About these figures

Figures are totals of the Small Business Administration's 7(a) and 504 FOIA loan files, data through 30 Jun 2026. SBA updates the files quarterly. Counts are loan approvals, including approvals later cancelled; the five-year window is FY2021–FY2025, the five latest complete fiscal years. Charge-off rates use only loans approved in FY2010–FY2021, at least five fiscal years ago, and count disbursed loans SBA records as charged off. Loans are listed under the lender they are assigned to today. Establishment counts are from the Census Bureau's County Business Patterns 2023, which leaves out most farms, government and businesses without employees. Dollar figures behind fewer than three approvals are not shown, and no borrower is named anywhere on this site.Methodology · Report an error